Fig.1 – Powersolve HPW02401 Series User Manual

Page 4

Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom
Tel 0044 (0)1635 521858 Fax 0044 (0)1635 523771

www.powersolve.co.uk

[email protected]

p.4/4 03.12B

(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

Fig.1

Terminal Connects:

1 = L

SK1

2 = N

3 = GND

1 = DC +

SK2

2 = DC +

3 = DC -

4 = DC -

SK3 A= Remote On/Off (shutdown)
B= DC-OK Relay

Screw terminal order codes:
DC-fail-relay& Shutdown, one plug for each
required (each package = 10 pcs )
Art.No.: 3520037 (2 pins)

Optional Coating (option C):
We offer the HPW-Series with optional coating. It is to be used in e.g. dusty, dirty, high humidity, or in awaiting quick
temperature changes. Short circuit and corrosion at print board lines and at solder points can be prevented. The coat itself is
a transparent acrylic resin. It is procured with a robotics varnishing machine.
Peters SL 1306 N-FLZ (transparent) IEC60216-1 2001, IPC-CC-830B, UL listed as permanent coating FileNo.: E80315 , UL94V-0

Order Codes:

HPW02401.12T 9..18Vdc DIN-Rail HPW02401.12W 9..18Vdc Wallmount Options to be added to the order-code:
HPW02401.24T 18..30Vdc DIN-Rail HPW02401.24W 18..30Vdc Wallmount C coating
HPW02401.36T 30..43Vdc DIN-Rail HPW02401.36W 30..43Vdc Wallmount Order samples:
HPW02401.48T 43..53Vdc DIN-Rail HPW02401.48W 43..53Vdc Wallmount HPW02401.24TC DIN-Rail+Coating
HPW02401.60T 53..72Vdc DIN-Rail HPW02401.60W 53..72Vdc Wallmount HPW02401.24WC Wallmount+Coating
HPW02401.72T 68..86Vdc DIN-Rail HPW02401.72W 68..86Vdc Wallmount

Mechanics & Installation of the HPW02401:
Stable metal/aluminium housing IP20. To allow adequate convection, a free air space of 50mm (top/bottom) and 5mm (sidewalls) is
required for the HPW02401; for active devices 15mm space from the HPW-sidewalls. For free air convection it is necessary to install
the HPW horizontal (Figure1). You can use the DIN-Rail installation (equiped standard) with our patented 35mm DIN-Rail bracket
according to EN60275. It is easy to mount/dismount while snaping it onto the 35mm DIN-Rail without any tools necessary.It is a
wallmount fastener available as option, too.

Safety Instructions:

Please read all warnings and advices carefully before installing or operating the HPW. Retain this operation manual always

ready to hand.The HPW must be installed by specialist staff only.

Installation:

1.)

The HPW is designed for systems fulfilling the safety norms of
dangerous voltages/energy and fire prevention

2.)

Installation is restricted to specialists only, make sure that the AC
wire system is free of voltage

3.)

Opening the HPW, making any modifications to it, dismounting any
screws from it, operating the HPW out of specification and/or using
it in appropriate area will unevitably result in loosing manufactureres
guarantee; we decline taking any responsibility for risk of demages
caused to someones health or to any installed system.

4.)

Attention: The HPW has an internal input fuse. It is necessary to
wire an automatic circuit braker to the line. We suggest to use a
10A-type with B-characteristic. It is verboten to operate the HPW
without protective earth wired. It essential to install a line switch
before the HPW.

Warnings

Disregard these warnings can cause fire, electic shock, serious
accident and death.

Never operate the HPW without Protective Earth
Conductor

Before connecting the HPW to the AC wire system
make all wires free of voltage and assure accidently
switch on

Allow neat and professionel cabeling

Never open nor try to repair the HPW by yourself.
Inside are dangerous voltages that can cause electric
shock hazard.

Avoid metal pieces or other conductive material to fall
into the HPW

Do not operate the HPW under damp or wet
conditions

It is verboten to operate the HPW under Ex conditions
or in Ex-Area

Connectors

(IEC60664-1 , IEC61984)

Wiring

Solid

Flexible

AC-Input &
DC-Outputs

0,5...6mm²
20...10 AWG

0,5...4mm²
20...12AWG

Rated Current

30A

Signal
Outputs (A,B)

0,2...2,5mm²
24...14 AWG

Wallmount

35mm DIN-Rail