Powersolve MP Series - Manual (Page 9)

Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
AC-DC Converters
MP Series
MP8 (800/1000 Watts Max) 7-Inch Case Size: MP8: 2.5” x 7” x 10” (63.5mm x 177.8mm x 254mm)
Weight: • MP8 Case: 4.1lbs
• 36W Triple: 0.5 lb.
• 210 W Single: 0.6 lb
• 360W Single 1.0 lb
• 600W Single: 2.0 lbs.
• 144W Dual: 0.6 lb
59.5
2.34 60.5
2.38
D
OUTPUT MODULE AREA
(4X)
171.45
6.75
19.05
0.7
14.0
0.55
14.7
0.58
38.10
1.5
AC INPUT
S
L
O
T
6
S
L
O
T
5
S
L
O
T
4
S
L
O
T
3
S
L
O
T
2
S
L
O
T
1
31.8
1.25
35.0
1.38
19.05
0.75
171.45
6.75
29.05
1.1
171.45
6.75
12.70
0.5
"A"
"A" "A"
"A"
"B"
"B"
"B"
"B"
152.40
6.0
12.70
0.5
254
10.0
177.8
7.0
63.5
2.5
63.5
2.5
177.8
7.0
254
10.0
Standard Airflow
2
1
#8-32 MOUNTING HOLES
MARKED “A” (4X)
M4 MOUNTING HOLES
M4 MOUNTING HOLES
MARKED “B” (4X)
Note:
1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs. (0.67 N-m).
2. Control connectors: (J1 and J2) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp
contacts (Molex C - Grid III Series) or AMP Model number 87977-3 with 87309-8 pins. Connector kit includes mating connector and 10 pins,
part #70-841-004.
3. Chassis material: aluminum with chemical film coating (conductive).
4. All dimensions are in millimeters and inches, and are typical.
5. Customer mounting -3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.150” (3.8mm). Max. torque: 5in-lbs.
6. Output module connections: All single O/P modules are M4 x 8mm screws. Max. torque: 10in-lbs.Dual O/P module is M3 x 8mm screws.
Max. torque: 5 in-lbs. Triple O/P module is .045” square pins on .156” centers. Mates with Molex 09-50-8063 or equivalent.