PowerWalker VFI 6000T LCD - Manual (Page 57)

54
10. Software Installation
WinPower is UPS monitoring software, featuring user-friendly interface
to monitor and control your UPS. This unique software provides
complete power protection for computer system while power failure.
With the software users can monitor any UPS status on the same LAN.
Furthermore, a UPS can provide security protection for more than one
computer on the same LAN at the same time, such as shutting down
system in security, saving application data and shutting down the UPS
when power fails.
Software Installation on your PC:
Connected by USB to a PC or notebook, the Software enables communication
between the UPS and the computer. The UPS software monitors the status of the
UPS, shuts down the system before the UPS is exhausted and can remotely
observe the UPS via the Network (enabling users to manage their system more
effectively). Upon AC failure or UPS battery low, UPS takes all necessary actions
without intervention from the system administrator. In addition to automatic file
saving and system shut-down functions, it can also send warning messages via
pager, e-mail etc.
•
Use the bundled CD and follow the on-screen instructions to install the
software WinPower.
•
Enter the following serial No. to install software:
511C1-01220-0100-478DF2A
•
After the software is successfully installed, the communication with UPS has
been established and an green icon will appear in the system tray.
•
Double-click the icon to use the monitor software (as above).
•
You can schedule UPS shutdown/start-up and monitor UPS status through
PC.
•
Detail instructions please refer to the e-manual in the software.
Check www.powerwalker.com/winpower.html from time to time to get the latest
version of monitoring software.