Duro-Last Duro-Grip Weather-Tite Hurricane Force PG-1 - Manual (Page 2)

WTT Systems - Roofing Division
n
A Millennium Adhesive Company
n
888.564.9733
n
wttus.com
PG1SD0408-B
09/08
SAFETY
Prior to working with any product, be sure to read
labels and the Material Safety Data Sheet (MSDS). Take
necessary health and safety precautions.
STORAGE
Keep temperature of contents between 45°F-95°F
(7°C-35°C). Bring temperature of material to
approximately 70°F (22°C) just before use. Do not store
in direct sunlight or high temperatures 95°F (35°C) and
higher. Store boxes valve side up.
KEEP FROM FREEZING
SURFACE PREPARATION
All work surfaces should be clean, dry, and free of dirt,
dust, debris, oils, loose and/or embedded gravel, un-
adhered coatings, deteriorated membrane and other
contaminants that may result in a surface that is not
sound or is uneven.
For re-cover applications apply Weather-Tite Universal
Primer prior to the application of Hurricane Force PG-1
Insulation Adhesive. For applications over fresh and/or
non-oxidized asphalt, coal tar or plastic film membranes,
apply Weather-Tite Surface Treatment prior to the
application of Hurricane Force PG-1 Insulation Adhesive.
LIMITATIONS
• Do not apply to a wet surface
• Not recommended for use with insulation boards larger
than 4’ x 4’ (1.2m x 1.2m)
• Do not use warped or curled insulation boards. All
insulation boards must lay flat upon the roof surface
• Do not apply when temperatures are below 40°F (5°C)
Weather-Tite Hurricane Force PG-1 Pump Grade Insulation
Adhesive eliminates the need for mechanical fasteners
Miami-Dade County, Florida
NOA No.:07-1015.02
Expiration date: 07/24/13
PACKAGING OPTIONS AND COVERAGE
Complete Kit:
Part 1 (A) - 5 gallon (18.9L) box
Part 2 (B) - 5 gallon (18.9L) box
Part 1 (A) - 5 gallon (18.9L) pail
Part 2 (B) - 5 gallon (18.9L) pail
Part 1 (A) - 50 gallon (189L) drum
Part 2 (B) - 50 gallon (189L) drum
Part “1” and Part “2” mixed through an approved low
pressure pump cart will produce the following coverage
rates:
5 gallon (18.9L) Kit: 2,000 - 2,500 sq.ft. (186m 2 - 232m 2 )
50 gallon (189L) Kit: 20,000-25,000 sq.ft.
(1860m
2 - 2322m 2 )
Coverage estimates indicate total sq. ft. of insulation
attachment per kit. Rates are based on an application
pattern of 4 (four) 1/2” - 3/4” (1.27 - 1.91cm) ribbons
spaced 12” (30cm) o.c. per 4’ x 4’ (1.2m x 1.2m) insulation
board.
NOTE: A 1/2” - 3/4” (1.27cm - 1.91cm) wide uncured
adhesive bead will produce a 2” - 3” (5.08cm - 7.62cm) wide
cured adhesive bead that will rise approximately
3/4” - 1” (1.91cm - 2.54cm) above the substrate. Coverage
rates may vary when used over irregular surfaces and will
vary depending on roughness.
EQUIPMENT OPTIONS
Weather-Tite Cyclone and Cyclone II Pump machines •
Graco E-10 Reactor •
Graco Predator •
Adhesives Systems Technology GMP-075 •
Adhesives Systems Technology PCH GMP-500 •
For a complete list of approved low pressure pump carts, or
additional information, contact our Technical Department.
WARRANTY
WTT Systems, LLC guarantees this product to be free
of manufactured defects for the shelf life period of 12
months from date of manufacture. All claims must be
made in writing within 12 months of the original purchase.
For detailed information regarding 10 year, 15 year or
20 year extended term system warranties, contact our
Technical Department.
0,$0,'$'(&2817<
$33529('
"Subject to the conditions of Approval
when installed as described in the current
edition of the FM Approval Guide."