Duro-Last Pitch Pan - Manual

DATA SHEET
Pitch Pan
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/12/2012
Description:
Prefabricated Pitch Pans deliver a watertight seal
around rooftop protrusions.
Fabricated from 24-gauge vinyl-coated metal
and 6” Duro-Last
® membrane skirt to exact
specification.
8” height minimum.
Custom designs available upon request.
Pitch pan is shipped with one corner open to
install around existing penetrations.
Contact Duro-Last or EXCEPTIONAL ® Metals to
request a color chart, samples and information
regarding custom metals and finishes.
Installation:
1. Install in accordance with Duro-Last detail
drawing #4045.
2. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.
Warranty:
Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.
Technical Services:
Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.