Duro-Last Vinyl-Coated Drip Edge - Manual

DATA SHEET
Vinyl-Coated Drip Edge
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/30/2012
Description:
The Vinyl-Coated Drip Edge provides maximum water
flow from roof decks while providing an architectural,
visually-attractive termination.
Fabricated from vinyl- coated metal with a 6”
attached membrane skirt in 10’ lengths; 2” – 8”
widths.
Profiles can be custom-fabricated to meet most
specifications.
Can be fabricated to accommodate various roof
pitches and mansards with a maximum face size
of 8”.
Available in white, tan, gray, or dark gray and
can be painted with latex or acrylic paint to
match building design.
Contact Duro-Last
®
or EXCEPTIONAL
®
Metals to
request a color chart, samples and information
regarding custom metals and finishes.
Energy Efficiency:
LEED ® and ENERGY STAR ® compliant; Recyclable.
Installation:
1. A wood nailer is requ ired if 1” or greater of
insulation is used.
2. This nailer should be attached to the wall in
accordance with ANSI/SPRI ES-1 3.9.
3. Install in accordance with Duro-Last detail
drawing #3120.
4. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.
Warranty:
Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.
Technical Services:
Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.
Material Gauge Finish
Galvalume 24-gauge PVC