Duro-Last Insulation Plate User Manual
Duro-last, Insulation plate, Data sheet
Duro-Last: The Proven Performer®
"Duro-Last" and "The World's Best Roof" are registered marks owned by Duro-Last , Inc.
www.duro-last.com
800-248-0280
DATA SHEET
2009
26
DURO-LAST
®
INSULATION PLATE
Description:
The Duro-Last® Insulation Plate is a 0.375 inch
(9.5mm) thick, 3 inch (76.5mm) diameter distribution
plate designed to hold insulation and underlayment
boards under the Duro-Last roofing system.
The Duro-Last Insulation Plate includes a recessed
0.280 inch (7 mm) diameter hole in the center,
keeping the head of the fastener from coming into
contact with the Duro-Last roofing membrane. To
maintain necessary strength and position, the
Duro-Last Insulation Plate is manufactured with a
thick center that embeds into the insulation and a thin
flexible exterior to help reduce facer tear. In addition,
there are tabs pressing against the fastener head to
prevent the fastener from backing out.
The Duro-Last Insulation Plate is a long-lasting,
durable plate that is available only from Duro-Last,
Inc.
Material Safety Data Sheet:
Product Identity: Duro-Last Insulation Plates
Installation:
1. Refer to details 1020 and 1030 installation
information.
Note:
•
The Duro-Last Insulation Plate must be used for
securing ONLY insulation to the deck.