B&B Electronics VESP211 Series - Manual - Manual (Page 59)

Section 9 - Appendix Vlinx VESP211 Serial Server
Page 59 of 66 Manual Documentation Number: VESP211-5011m
www.bb-elec.com/
www.bb-europe.com/
S
ECTION
9
Appendix
Appendix A: Default Server Settings
Setting Default Value
Server Name MODEL NUMBER
Serial Number Printed on the label
Password password field is blank from factory
DHCP Enable
IP Address BASED ON DHCP SERVER
If a DHCP assignment is not available, the device will default to 169.254.102.39
Net Mask 255.255.0.0
Gateway 169.254.1.1
Firmware Version X.X.X (Current Version)
Hardware Version X.X (Current Version)
Port 1
Serial port mode RS-232
Baud Rate 9600
Data bits 8
Parity None
Stop bits 1
Flow Control None
Protocol TCP
Serial timeout 0 seconds
TCP alive timeout 0 minutes
Connection Mode Server
Delimiter HEX 1 00
Delimiter HEX 2 00
Remove delimiters Disable
Force transmit 0 ms
Inter-character timer 0 ms
Character count 0
Max connection 1