B&B Electronics VESP211 Series - Manual - Manual (Page 34)

Section 4 - Configuring the Serial Server Vlinx VESR4x4 Serial Server
Page 34 of 66 Manual Documentation Number: VESP211-5011m
www.bb-elec.com/
www.bb-europe.com/
Figure 29. Paired Mode Configuration
Setting the serial server to operate in Paired Mode as a client
1. Select Paired protocol.
2. Select to initiate connections (client)
3. Type the IP address and TCP port numbers of the server in the appropriate
text boxes.
4. Select:

at power up
- if you want the serial server to always be connected
 when the serial port receives data - if you only want to establish a
connection when there is data to be sent.
Setting the serial server to operate in Paired Mode as a server
1. Select Paired protocol.
2. Select
to wait for connections
(server).
Figure 30. Paired Mode Settings