B&B Electronics VESP211 Series - Manual - Manual (Page 26)

Section 4 - Configuring the Serial Server Vlinx VESR4x4 Serial Server
Page 26 of 66 Manual Documentation Number: VESP211-5011m
www.bb-elec.com/
www.bb-europe.com/
Figure 20. General Configuration Page
Changing the serial server’s name:
1. Type the new name into the Serial Server Name text box.
2. Click Save .
Changing the password:
1. Select the
I want to change the password
check box.
Two text boxes appear.
Figure 21. Changing the Password
2. Type the new password into both boxes
3. Click Save .
Setting up IP Addressing
On the Network Configuration page you can configure the serial server to use
dynamic (DHCP) or static IP addressing on the network.