B&B Electronics 856-14500-01 - Manual - Manual (Page 13)

10
Management
Although the iMcV-FiberLinX-II provides a twisted pair port solely for management
(EXT MGMT), the iMcV-FiberLinX-II can be configured to accept IP-based
management traffic from any of its three ports. Enable management on more than
one port, or disable management on all of the ports, as desired. These switches limit
only IP-based management. Host-to- Remote management is IP-less and is never
blocked from the fiber port. Serial port management of the unit is always available
on the EXT MGMT port regardless of the DIP Switch settings.
In addition to defining which ports are used to manage the iMcV-FiberLinX-II units,
the management DIP Switch settings also define what ports the flow of the Network
Provider’s Management Domain traffic can take through the unit. See Application
Examples for information regarding the Management Domain.
DIP Switch 1 = On for management on the EXT MGMT port.
DIP Switch 2 = On for management on the DATA port.
DIP Switch 3 = On for management on the OPTICS or UPLINK port.