beautypg.com

B&B Electronics 856-14869--93 - Manual User Manual

Page 6

background image

3

take effect. Refer to About Serial Port Configuration for more information about
Enabling/Disabling DHCP.

When there is no DHCP server on the network, use iConfig or serial configuration to
manually set the IP addresses.

When DHCP is enabled, the IP address (default 10.10.10.10 or user configured) is
saved. When DHCP is disabled, the saved IP address will be reinstated and the
device will reboot.

DHCP servers give out lease times: devices renew their leases based on the
administrator-specified time. If a device cannot renew its lease, and the lease expires,
the device will be given the IP address 10.10.10.10 and will reboot.

See also other documents in the category B&B Electronics Accessories communication: