B&B Electronics 856-14869--93 - Manual - Manual (Page 15)

12
Bandwidth Control
The iMcV-Giga-FiberLinX-II includes bi-directional bandwidth control in 32 Kbps
increments (configurable via iView
2 ). This allows the bandwidth limit to be set
independently from the DATA Port to the OPTICS (or UPLINK) Port and vice versa in
a single iMcV-Giga-FiberLinX-II application. In a dual iMcV-Giga-FiberLinX-II
application, it can be set from the Host unit to the Remote unit and vice versa (i.e.,
the bandwidth on the DATA ports on both the Host and Remote modules can be
limited independently).
NOTE
Management packets do not have priority over data packets.