Electrical specifications – Rainbow Electronics AT45DB081D User Manual
Page 32
32
3596N–DFLASH–11/2012
AT45DB081D
18. Electrical Specifications
Note:
1. After power is applied and V
CC
is at the minimum specified datasheet value, the system should wait 10 ms before an opera-
tional mode is started
Table 18-1.
Absolute Maximum Ratings*
Temperature under Bias ................................ -55
C to +125C
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. The "Absolute Maximum Rat-
ings" are stress ratings only and functional
operation of the device at these or any other con-
ditions beyond those indicated in the operational
sections of this specification is not implied. Expo-
sure to absolute maximum rating conditions for
extended periods may affect device reliability.
Voltage Extremes referenced in the "Absolute
Maximum Ratings" are intended to accommo-
date short duration undershoot/overshoot condi-
tions and does not imply or guarantee functional
device operation at these levels for any extended
period of time
Storage Temperature..................................... -65
C to +150C
All Input Voltages (except V
CC
but including NC pins)
with Respect to Ground ...................................-0.6V to +6.25V
All Output Voltages
with Respect to Ground .............................-0.6V to V
CC
+ 0.6V
Table 18-2.
DC and AC Operating Range
AT45DB081D (2.5V Version)
AT45DB081D
Operating Temperature (Case)
Ind.
-40
C to 85C
-40
C to 85C
V
CC
Power Supply
2.5V to 3.6V
2.7V to 3.6V