Grain Systems Tanks PNEG-1095 - Manual (Page 48)

6. Installation
48 PNEG-1095 FCDL 4.00" Corrugation Externally Stiffened Grain Bin
Top Stiffener Starting Location
Installing Stiffeners
1. All stiffeners are to be installed on the exterior of the bin. Be sure and use 5/16" x 3/4" grade 5
bin bolt with neoprene washer with the bolt head and washer on the inside of the grain bin. Refer to
spread chart for proper location of stiffeners and sidewall sheets on
Pages 42-47 . (See Figure 6G.)
Figure 6F
Figure 6G
See detail “A” in Figure 6F