Rough Country 770S - Manual (Page 7)

25. Using a 19mm socket remove the 2 factory bolts from the passengers side diff bracket, and 3 factory bolts from the
drivers side diff bracket. Retain factory hardware. See PHOTO 17. & 18
PHOTO 17 PHOTO 18
26. Remove the rear differential bracket using a 12mm allen socket and a 17mm wrench. Retain factory hardware. See
PHOTO 19 & 20.
PHOTO 19 PHOTO 20
PHOTO 21 PHOTO 22
27. Using the bushing from 1770bag3, place the bushing in the top hole of the cross member as shown in PHOTO 21.
Bolt the differential mount to the diff with the factory hardware and secure the bracket to the frame using the supplied
12mm x 35mm bolt in 1770bag3.
28. Install the front cross member into the front mounting pockets using the supplied 3/4” x 4 1/2” bolts washers and nuts
from 1770bag1. See PHOTO 22.