VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol Approval according to LPR radio standard - Manual (Page 46)

1
Fig. 26: Connecting the PC via USB to the Modbus electronics
1 USB cable to the PC
Connection of the PC to the RS 485 cable is carried out via a standard
interface adapter RS 485/USB. Parameter adjustment of the Modbus
electronics and the sensor electronics is possible via this connection.
Information:
For the parameter adjustment it is absolutely necessary to separate
the connection to the RTU.
RS485
USB
1
2
3
4
5
Fig. 27: Connection of the PC via the interface adapter to the RS 485 cable
1 Interface adapter RS 485/USB
2 USB cable to the PC
3 RS 485 cable
4 Sensor
5 Voltage supply
To the RS 485 cable
46 VEGAPULS 62 • Approval according to LPR radio standard
7 Setting up sensor and Modbus interface with PACTware
41722
-EN
-120706