beautypg.com

4 accessories and replacement parts – VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol Approval according to LPR radio standard User Manual

Page 10

background image

The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.

Unless otherwise indicated, the packages must be stored only under
the following conditions:

l

Not in the open

l

Dry and dust free

l

Not exposed to corrosive media

l

Protected against solar radiation

l

Avoiding mechanical shock and vibration

l

Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions
"

l

Relative humidity 20 … 85 %

3

.4 Accessories and replacement parts

The indicating and adjustment module PLICSCOM is used for
measured value indication, adjustment and diagnosis. It can be
inserted into the sensor and removed at any time.

You can find further information in the operating instructions "Indicating
and adjustment module PLICSCOM
" (Document-ID 27835).

The interface adapter VEGACONNECT enables the connection of
communication-capable instruments to the USB interface of a PC. For
parameter adjustment of these instruments, an adjustment software
such as PACTware with VEGA-DTM is required.

You can find further information in the operating instructions "Interface
adapter VEGACONNECT
" (Document-ID 32628).

The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.

You will find additional information in the supplementary instructions
manual "Protective cover" (Document-ID 34296).

Flanges are available in different versions according to the following
standards: DIN 2501, EN 1092-1, ANSI B 16.5, JIS B 2210-1984,
GOST

12821-80.

You can find additional information in the supplementary instructions
manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID
31088).

Transport inspection

Storage

Storage and transport
temperature

Indicating and adjust-
ment module

Interface adapter

Protective cover

Flanges

10

VEGAPULS

62 • Approval according to LPR radio standard

3 Product description

41722

-EN

-120706