VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol Approval according to LPR radio standard - Manual (Page 45)

7 Setting up sensor and Modbus interface
with PACTware
7 .1 Connect the PC
Connection of the PC to the sensor electronics is carried out via the
interface adapter VEGACONNECT 4. Only the parameter adjustment
of the sensor electronics is possible via this connection.
3
1
2
Fig. 25: Connection of the PC directly to the sensor via the interface adapter
1 USB cable to the PC
2 Interface adapter VEGACONNECT 4
3 Sensor
Information:
The interface adapter VEGACONNECT 3 is not suitable for connection
to the sensor.
Connection of the PC to the Modbus electronics is carried out via a
USB cable. Parameter adjustment of the Modbus electronics as well
as the sensor electronics is possible via this connection.
To the sensor electro-
nics
To the Modbus electro-
nics
VEGAPULS 62 • Approval according to LPR radio standard 45
7 Setting up sensor and Modbus interface with PACTware
41722
-EN
-120706