VEGA RS232_Ethernet connection - Manual (Page 53)

53
10 Measured value/Status files
RS232/Ethernet connection • VEGAMET 391/624/625, VEGASCAN 693, PLICSRADIO C62
30325-EN-130701
File content Description
Start-TAG for output status information
… TAGs current output status information
… TAGs relay status information
… TAGs PC/DCS output status information
End-TAG measure-
ment loop status information
End-TAG for output status information
End-TAG for data
The information within the ""-TAG is information on VE-
GAMET/VEGASCAN/PLICSRADIO. It is stated once at the beginning
of the document.
Within the ""-TAG there is status information about a
measurement loop. Such a TAG exists for each measurement loop,
e.g. up to 3 such TAGs can be available with a VEGAMET, 15 with a
VEGASCAN 15 and six with a PLICSRADIO C62.
In the " "-TAG you find the status information on the input of a
measurement loop.
In the " "-TAG you find the status information on the
measurement loop processing of a measurement loop.
In the " "-TAG you find the status information on the outputs
of the measurement loop.
In the " "-TAG you find the status information of the current
output of the measurement loop.
In the " "-TAG you find the status information of the relay output
of the measurement loop.
In the " "-TAG you find the status information of the PC/DCS
output of the measurement loop.
In these TAGs there are additional TAGs which are explained in the
following example.
File content Description
encoding="iso-8859-1"?
XML version
Start-TAG for data