VEGA VEGAMET 614 - Manual (Page 28)

28 VEGAMET 614
7.2 Configuration of inputs
Settings in the "Extended menu“
DISBUS
MET 05
Input 1 "local MET“
Confi-
gura-
tion
Config
inputs
Input
no. 1
Input
from
local
Met
Chan-
nel no.
S1
Sensor
charac-
teristics
Min.
meas.
range
0,00
Max.
meas.
range
1,00
Min.
sensor
value
4,000
Max.
sensor
value
20,000
TAG -
No. 1
%
xx,x
Param.
TAG-
No. 1
MET02
MET03
MET04
….
Input
undef-
ined
Input1
Input2
Input3
Input local MET:
Here you can call another VEGAMET (e.g.
Met 05) and thereby specify that the input
signal is not taken directly from a connected
sensor, but from a VEGAMET connected via
DISBUS (e.g. VEGAMET 614). The called
VEGAMET number corresponds to the
DISBUS address of the instrument (see
chapter 4.1).
If another VEGAMET has been selected, the
menu item "Input undefined" appears in which
you can set the input number of the other
VEGAMET (see illustration).
The menu items "Min. meas. range“ and
"Max. meas. range“ are only visible with
hydrostatic pressure transmitters. You can
obtain the relevant sensor data from the test
certificate of the hydrostatic pressure trans-
mitter.
Ser. No.
12345678
CONNECT
%
100
+ -
OK ESC
on
1 2
614 Ser. No.
12345678
CONNECT
%
100
+ -
OK ESC
on
1 2
614
TAG-
No. 1
%
35,9
Ein-
gang
Ein-
gang1