VEGA VEGAMET 614 - Manual (Page 25)

VEGAMET 614 25
6.7 Simulation
To check outputs and connected instruments,
you can adjust any individual percentage
value with the keys [+] and [–] in this menu
item. Initial point is always the actual meas-
ured value. The indicated value flashes when
simulation is activated. 15 minutes after set-
ting the simulated value, the simulation auto-
matically terminates and resets to meas.
value indication.
6.8 Password, language, default,
reset, menu mode
Settings in the "Reduced menu“
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Ad-
just-
ment Signal
condit-
ioning Out-
puts
Simu-
lation
Now !
OK ?
Simu-
lation
Simu-
lation
%
xx,x
Meas.
value
indication
Password
You can also protect VEGAMET 614 against
unauthorised or incorrect adjustment. Acti-
vate in the menu "Password“ the option "on“
(with keys [+], [–] and [OK]). Now, you can
only check the meas. value on the display.
You can still reach any menu item with the
arrow and OK keys, but as soon as you try
to modify an adjustment, you are asked for
the password. Enter the number "614“ (with
the keys [+], [–] and [OK]), to carry out the
adjustment. Entering the password once is
sufficient to open all protected menu items.
Language
In the menu item "Language“, you can
choose a language other than German such
as English, French etc. as menu language
(with keys [+], [–] and [OK]).
Reset
In the menu item "TAG 1 to default“ you reset
all settings relating to measurement loop 1 to
default. If, for example, you have changed
the name of the measurement loop to "Silo 5“,
after the reset, the name is again "TAG-No.
1“. Also, all adjustment values that you have
entered for measurement loop 1 are now
reset to default.
Menu mode
The menu modes "Reduced“ and "Extended“
are available. With the keys [+], [–] and [OK]
you choose the required menu mode. The
menu schematics of the reduced menu and
the extended menu are shown later in this
operating instructions manual. The factory
setting is "Reduced menu“.
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1 Confi-
gura-
tion Add’l
func-
tions
Pass-
word
on
Langu-
age
Eng-
lish
TAG 1
to de
fault Menu
mode
Redu-
ced
Reset
OK ?
Reset
Now !
OK ?
Meas.
value
indication
Ex-
tended
off
French
Ger-
man
etc.
Reset
TAG 1