VEGA VEGAMET 514V - Manual (Page 24)

24 VEGAMET 514V
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1 Confi-
gura-
tion Add’l
func-
tions
Pass-
word
off
Lang-
uage
Eng-
lish
TAG 1
to de
fault Menu
mode
Redu-
ced
Reset
OK ?
Reset
now!
OK ?
Ex-
tended
on German
French
etc.
Reset
TAG 1
Password
You have the possibility to protect VEGAMET
514V against unauthorised or wrong adjust-
ment. Activate in the menu "Password“ the
option "on“ (with keys [+], [–] and [OK]).
Now you can only check the meas. value on
the display. You can still reach any menu item
with the arrow and OK keys, but as soon as
you want to modify an adjustment, you are
asked for the password. Enter the figure
"513“ (with the keys [+], [–] and [OK]), to
carry out the adjustment. One single entering
of the password is sufficient to open all pro-
tected menu items.
Language
In the menu item "Language“, you can
choose a language other than German, such
as English, French etc. as menu language
(with keys [+], [–] and [OK]).
Settings in the "reduced menu“
6.9 Password, language, default, reset, menu mode
Default
In the menu item "TAG 1 to default“ you reset
all settings concerning measurement loop 1
to default. If, for example, you have changed
the name of the measurement loop to "Silo 5“,
after the reset, the name is again "TAG-No.
1“. Also all the adjustment values you have
entered for measurement loop 1 are now
reset to default.
Reset TAG 1
With "Reset TAG 1“ the measurement loop
configuration will be deleted. This function
must be carried out if you want to change the
measuring principle applied (e.g. radar in-
stead of hydrostatic).
Menu mode
The menu modes "Reduced“ and "Extended“
are available. With the keys [+], [–] and [OK]
you choose the required menu mode. The
menu schematics of the reduced menu and
the extended menu are shown later in this
operating instructions manual. The factory
setting is "Reduced menu“.
Delete
TAG
1?
Reset
OK ?
Reset
now!
OK ?
Meas.
value
indication