VEGA VEGAMET 514V - Manual (Page 23)

VEGAMET 514V 23
6.8 Simulation
To check outputs and connected instruments,
you can adjust any individual percentage
value with the keys [+] and [–] in this menu
item. Initial point is always the actual meas-
ured value. The indicated value flashes when
simulation is activated. 15 minutes after set-
ting the simulated value, the simulation auto-
matically terminates and resets to meas.
value indication.
Settings in the "reduced menu“
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Ad-
just-
ment Signal
condi-
tioning Out-
puts
Simu-
lation
now!
OK ?
Simu-
lation
Simu-
lation
%
xx,x
Meas.
value
indication