VEGA VEGAMET 514V - Manual (Page 12)

12 VEGAMET 514V
Adjustment
4.2 Adjustment system
Indicating and adjustment module
Depending on the menu item, change
value or choose out of a list
Choose menu item
Depending on the menu item, save the set
value or change to the lower menu
Branching point, i.e. jump to the next
lower menu with [OK]
Depending on the menu item, interrupt
adjustment or change to the next higher
menu
Indication of
- measured value
- menu item
- parameter
Reduced menu - extended menu
Two menu schematics are available: the "re-
duced menu“ and the "extended menu“.
Note:
VEGAMET 514V is preset such that you are
in the menu item "reduced menu“!
In the majority of all applications, you can
carry out the necessary settings in this menu
mode (see also chapter 4.5 Comparison of
the menu modes).
Adjustment structure
The adjustment is made via 6 keys in con-
junction with the text display. The jump from
the measured value display to the lower
menu item is made with [OK]. Use [–>] or
[<–] to change within this menu level from
one menu item to the other. A branching point
is indicated by the symbol ▼ and enables
with [OK] a jump to the lower menu item.
Parameters are indicated by the missing
symbol ▼. The value of the parameters can
be modified with [+] or [–] or chosen out of a
list. The modified value can be saved with
[OK]. To interrupt a setting (without saving
the modification), you have to push [ESC].
The reset to the next higher menu item is
made with [ESC]. 15 minutes after pushing
the key for the last time, an automatic reset to
the measured value display is triggered. The
reset to the next higher menu level with [ESC]
is possible from each menu item , even if no
connection is shown in the menu schematics.
If you are in the utmost right menu item of a
menu row and push the [–>] key, you will
immediately reach the utmost left menu item
of this row. You also reach immediately the
right menu item from the left one, if you push
the [<–] key.
The connections (shown with a broken line)
are not shown in the menu schematics in
order to provide better overview.
Add’l
func-
tions
Pass-
word
off
Lang-
uage
Eng-
lish
TAG 1
to de
fault Menu
mode
Redu-
ced
ESC ESC ESC ESC
Volt
output 1
prop.
to
Per-
cent
Unit
0,0%
Volt
output
0/10V
Failure
mode
0V
Volt
limita-
tion
on
%
100
+ -
OK ESC
Reset
TAG 1
ESC