VEGA VEGAMET 514V - Manual (Page 13)

VEGAMET 514V 13
Adjustment
4.3 Adjustment via PC
Signal conditioning instrument with ad-
justment module
Setup
- directly via the keys of the adjustment
module
- or with a PC, equipped with VVO software
(VEGA Visual Operating) and an interface
adapter VEGACONNECT.
Signal conditioning instrument without
adjustment module
Setup
- with a PC, equipped with VVO software
(VEGA Visual Operating) and an interface
adapter VEGACONNECT.
Demonstrations in the menu schematic
In white letters you see the param-
eters which can be modified with the
[+] or [–] key and can be saved with
the [OK] key.
Examples:
- In the menu item "Language“ you can
change from German to English.
Bolt print/italic inputs, e.g. the meas-
urement loop name "TAG-No. 1" can
differ when you have made the ap-
propriate parameter adjustment or
configuration of the measurement loop. In the
menu schematics you see the factory setting.
Light grey menu items are only dis-
played if necessary (depending on
the adjustments in the other menu
items).
Change of the menu mode:
Move from the display of measured value
(TAG-No.1) to the menu item "Menu mode
reduced“. Now push [+] twice until "Menu
mode Extended“ appears, then push [OK].
Lang-
uage
Eng-
lish
Param.
TAG-
No. 1
▼
Volt
at
0%
0,000
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1 Confi-
gura-
tion Add’l
func-
tions
Pass-
word
off
Lang-
uage
Eng-
lish
TAG 1
to de
fault Menu
mode
Redu-
ced
Ex-
tended
Reset
TAG 1
CONNECT
515
%
100
+ -
OK ESC
on
1 2
VEGACONNECT
PC with VVO software