VEGA VEGASON 54V…56V - Manual (Page 66)

66 VEGASON 54V … 56V
Setup - Adjustment with the PC on VEGAMET
Backup
• Click to „
Services/Backup/Sensors“.
In the menu field „ Backup“ the sensor with
the serial number is displayed. You can save
the sensor individually or in groups with all
settings in any directory on your PC. It is also
possible to add small notes to each backup.
Furthermore you can save the settings of the
VEGAMET signal conditioning instrument:
Saved sensor data can be transferred to
other sensors at a later time. If e.g. you have
a system with several of the same storage
vessels and identical sensors, it is sufficient,
to configure one sensor, to save the settings
and then transfer them to the other sensors.
• Choose the menu „
Services/Restore con-
figuration/Sensors“.
In the yellow window cutout, you choose a
sensors (or a signal conditioning instrument)
which should be overwritten with the settings
of another sensor.
Choose in the field „ Selection of backup“ the
serial number of the sensor of which you
want to take over the settings. With „
Restore
after“ you transfer these sensor settings to
the sensor you have chosen in the yellow
window cutout.