VEGA VEGASON 54V…56V User Manual
Page 47
VEGASON 54V … 56V
47
• Enter under name
"VEGA.
• Also enter
"VEGA under password.
The adjustment program VEGA Visual Ope-
rating (VVO), called in the following VVO,
gets into contact with the connected system
and indicates after a few seconds if and with
which system a connection exists.
User identification
The preadjusted user identification can be
modified at a later time in the menu „
User
access“.
Setup - Adjustment with the PC on VEGAMET
• Choose with the arrow keys or the mouse
the item "
Planning“ on the entrance screen
and click to "
OK“.
You are asked for the user identification.
Note:
If you make no connection with the sensor,
check the following:
- Is the sensor being supplied with sufficient
voltage (min. 20 V)
?
- Did you inadvertently use a VEGACON-
NECT instead of the new VEGACON-
NECT 2?
If the adjustment software VVO gets in con-
tact with the signal conditioning instrument for
the first time, you will be asked if you want to
transfer the data from the signal conditioning
instrument to the PC.
• Click to „
Yes“.
In the following menu window „
DISBUS-Netz-
Auswahl“ you can give a name to the data-
base or keep the proposed file name.