VEGA VEGASON 54V…56V - Manual (Page 51)

VEGASON 54V … 56V 51
You can carry out the min./max. adjustment
"with medium“ (adjustment by means of the
actual level) or
"without medium“ (without
taking the actual level into consideration, i.e.
with empty vessel).
Generally, you will carry out the adjustment
without medium. Then you are not concerned
about the actual vessel filling during adjust-
ment. When you want to carry out the adjust-
ment with medium, you have to carry out the
min. adjustment with emptied (also partly
emptied) vessel and the max. adjustment
with filled (also partly filled) vessel. It is con-
venient and quick to carry out the adjustment
without medium, as shown in the example.
• Choose "
no (adjustment without medium)“.
• Choose if you want the carry out the ad-
justment in meters (m) or in feet (ft).
• Enter a distance for the upper and lower
level and the volume in % corresponding to
each distance.
In the example, the 0 % filling is at a product
distance of 3.400 m and the 100 % filling at a
product distance of 0.500 m.
Setup - Adjustment with the PC on VEGAMET
Parameter adjustment 1
In the menu " Instrument data/Parameter ad-
justment“ you carry out all important sensor
adjustments.
Adjustment
• Choose the menu "
Instrument data/Param-
eter adjustment“ and then the sensor you
want to adjust.
If you have only configured one sensor on
the signal conditioning instrument, naturally
you will have a choice of only one sensor.
In the opening menu window, you now see
the previously entered measurement loop
names and the measurement loop descrip-
tions.
• First choose
„Adjustment“.
• Click in the menu window „ Adjustment“ to
„Min/Max adjustment“.