VEGA VEGAPULS 51V…54V User Manual

Page 88

VEGAPULS 51 V … 54 V

Generally it is useful to choose the operating
range approx. 5 % larger than the meas.
range.

In the example the meas. range was
adjusted by the min./max. adjustment to
0,500 … 3,400 m (min.-adjustment 0,500 m,
max.-adjustment 3,400 m).

You would then adjust the operating range to
0,400 … 3,500 m.

• Save the adjustments with "

OK"

• Click in the menu window "

Meas.

environment" to "Measuring conditions

Measuring conditions

Measuring conditions".

• In the menu window "

Measuring conditions"

click to the options corresponding to your
application.

• Confirm with "

OK".

After a few seconds of saving during which
the adjustments are permanently saved in
the sensor, you are again in the window
"

Meas. environment".

• Click in the menu window "

Meas.

environment" to "Quit

Quit

Quit".

You are again in the menu window "

Sensor

optimisation".

Echo curve

With the menu point "

Echo curve" you can

have a look to the course and the strength of
the detected radar echo.

If you have to expect strong false echoes
due to vessel installations, a correction of the
installation position (if possible) can help by
monitoring the echo curve, to localize and
reduce the size of the false echoes.

Proceed like in chapter "Echo curve" on

Proceed like in chapter "Echo curve" on
page 57…59.

page 57…59.

Set-up

Adjustment with the PC on VEGALOG