VEGA VEGAPULS 51V…54V User Manual

Page 86

VEGAPULS 51 V … 54 V

• Quit the menu with "

OK".

• Confirm the message with "

OK", and your

individual linearisation curve will be saved
in the sensor.

Again in the menu window "

Conditioning" you

can enter with the menu point "

Integration

time" a measured value integration. This is
useful for fluctuating product surfaces to
avoid a permanently changing measured
value indication and output.
As a standard feature an integration time of
0 seconds is adjusted.

• Quit the menu with "

OK".

• Quit the menu window "Instrument data

parameter adjustment" with "

OK".

Outputs

• Choose in the main menu window "

Instru-

ment data/Parameter adjustment

ment data/Parameter adjustment", and then
the menu point "

Outputs

Outputs".

You are in the menu window "

Outputs".

• Click to "

Current output

Current output" to adjust the signal

mode of the 0/4…20 mA output signal.

• If you have made adjustments in the menu

window "Current output", click to
"

Save

Save".

• If you want to keep the adjustments

unchanged, click to "

Quit

Quit".

You are now again in the menu window
"

Outputs". With the menu point "Display of

measured value" you scale the sensor
indication or probably additional indicating
instruments connected to VEGALOG (see
also page 59 right column).

• Click in the menu window "

Outputs" to

"Quit

Quit

Quit" and you are in the menu window

"In-

strument data parameter adjustment"

• Click in the menu window

"Instrument data

parameter adjustment" again to "Quit

Quit

Quit".

Set-up

Adjustment with the PC on VEGALOG