VEGA VEGAPULS 51V…54V User Manual

Page 77

VEGAPULS 51 V … 54 V

Set-up

Adjustment with the PC on VEGALOG

• Enter under name "

VEGA

VEGA".

• Also enter under password

"VEGA

VEGA

VEGA".

The adjustment program, called in the
following VVO, contacts the connected meas.
system/sensor …… and shows after a few
seconds if and with which meas. system/
sensors a connection exists.

Note:

If you do not get a sensor connection, check
the following:
- is the processing system powered with

supply voltage?

- do you erroneously use a wrong RS232-

cable instead of the VEGA RS-232-
connection cable?

If VVO (adjustment software) contacts the
processing system for the first time, you are
asked if the data should be transferred from
the processing system to the PC.

• Click to "

Yes

es"

When you connect VVO to a VEGALOG
where data have been already saved, a
message is displayed whether you want to
transfer the saved data from the PC to
VEGALOG or whether the data of VEGALOG
should be transferred to the PC.

• Click to "

OK", and you are in the main menu

main menu

window

window.

The preadjusted identification can be
modified later in the menu "

Configuration/Pro-

gram/User access" (see page 47).