EVS IPDirector Version 5.9 - January 2011 Part 4 User’s Manual - Manual (Page 57)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 4: Ingest
EVS Broadcast Equipment – January 2011
46
2.16 WORKING WITH GANGED CHANNELS
In the Ingest Scheduler, the recorder channels can be ganged and unganged.
A block created on a channel is automatically created with the same properties on
all the ganged channels. Clips created by such blocks are linked and stay linked
even if the channels are unganged afterwards.
2.16.1 H
OW TO
G
ANG TWO OR MORE
I
NGEST
C
HANNELS FROM
I
NGEST
S
CHEDULER
To gang two or more channels, proceed as follows:
1. Select two or more channels using CTRL+click or SHIFT+click.
The selected channels are shown in blue.
2. Right-click one of the channels and select Gang.
3. The ganged channels are displayed with a chain symbol:
A block created on a channel is automatically created with the same properties on
all ganged channels.
2.16.2 H
OW TO
U
NGANG TWO OR MORE
I
NGEST
C
HANNELS FROM
I
NGEST
S
CHEDULER
To ungang two or more ganged channels, proceed as follows:
1. Select a ganged channel.
2. Right-click the channels and select Ungang.