3 rules when using start and stop buttons, 4 remaining capacity, Rules when using start and stop buttons – EVS IPDirector Version 5.9 - January 2011 Part 4 User’s Manual User Manual
Page 34: Remaining capacity, Ules, Sing, Tart and, Uttons, Emaining, Apacity

IPDirector Version 5.9 – User Manual – Part 4: Ingest
EVS Broadcast Equipment – January 2011
Issue 5.9.B
23
Pressing the Stop button will have the following effect, depending on ingests of
the corresponding channel:
Ingest Type
Action of Stop button
No ingest
No action.
Growing clip
Stops the recording of the growing clip.
Recording ingest
Stops the recording of the ingest.
Growing clip and
recording ingest
overlapped
Stops the recording of the selected clip.
If no clip is selected, the Stop button is unavailable.
2.6.3 R
ULES
W
HEN
U
SING
S
TART AND
S
TOP
B
UTTONS
•
Pressing the Start button starts the recording of a growing clip or a stream on
all the selected channels and all the channels ganged with the selected
channels.
•
Pressing the CTRL key + the Start button starts the recording of a growing clip
or a stream only on the selected channels.
•
Pressing the Stop button stops the recording of the clip or the stream on all the
selected channels and all the channels ganged with the selected channels.
•
Pressing the CTRL key + the Stop button stops the recording of the clip or the
stream only on the selected channels.
2.6.4 R
EMAINING
C
APACITY
The information about remaining capacity is displayed for each sub-track of an
ingest channel.
This can be displayed as time or storage capacity according to the settings
defined in Tools > Settings > Ingest Scheduler > Remaining Capacity. Refer to
section 2.8 ‘Settings’ on page 26 for more information.
If the remaining space/time falls below the Capacity Warning threshold defined in
the settings, the Remaining Capacity field is shown with a red background.