EVS XS Version 11.01 - November 2012 Configuration Manual - Manual (Page 94)

3.4. Channels Tab
3.4.1. Overview
Channels Tab
The Channels tab consists of maximum nine pages in the advanced mode in the server-
based application, and two pages in the basic mode. The Channels tab includes the
settings related to video and audio channels, type and configuration of recorders, audio
format and audio-video synchronization parameters.
Setting List
The table below presents the settings of the Channels tab. They specify where the setting
groups are available (page) and whether each setting is available:
• in the basic or advanced display mode in the server-based and web-based interfaces.
In the web-based interface, the settings are all displayed on one page.
• in the Technical Setup menu of the Remote Panel.
Setting Name Basic Advanced
Technical
Setup
Base settings P1 P1 T2.X
Inputs X X X
Outputs X X X
Base config X X X
3D X X X
3G/Dual X X X
Port settings P1 P1 T2.X
RS422 #1-#6 X X
Channels and control settings P1 P1 T2.X
OUT1-6 / IN1-6 X X X
Name X X X
Main ctrl X X X
Sec. ctrl X X
Mode X X
OSD X
XS Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 84