EVS IP2Archive Configurator Version 1.0 - July 2013 User Manual - Manual (Page 34)

4.2.5. Configuring the FlashNet Connection
Entering the Connection Data
The FlashNet Connection group box allows you to configure the connection between the
Tape Storage Controller and SGL's hierarchical storage management system FlashNet.
The following connection data has to be entered:
• Host : The IP address or machine name of the FlashNet server.
• Port: The listening port number of the FlashNet server. The default port number is
8199.
• Application Host: The IP address or machine name of the server that hosts Tape
Storage Controller.
In the Reply Timeout field you have to enter how many seconds Tape Storage Controller
will wait for the FlashNet server to respond after making connection before giving an error
. By default, this is set to 60 seconds.
If you select the Logging Enabled check box, extra logs related to FlashNet will be
added to the application log files. By default, this option is selected.
If you select the Trace Enabledcheck box, the XML communication between Tape
Storage Controller and FlashNet is added to the log files. By default, this option is not
selected.
The Test button can be used to test the connection with the FlashNet server.
Click the Save button to save your settings. Click the Undo button to undo the
information you have just entered or modified.
Setting the Maximum Number of Archive and
Restore Requests
The Storages area allows you to the set maximum number of archive and restore requests
that will be simultaneously sent to FlashNet by Tape Storage Controller.
By default, 2 archive and 2 restore requests will be sent at the same time.
30 4. Configuring Connections
EVS Broadcast Equipment S.A. - July 2013 Issue 1.0.D