EVS IP2Archive Configurator Version 1.0 - July 2013 User Manual - Manual (Page 22)

To create a connection with a particular IPDirector, click the New button. Enter a name for
the IPDirector you want to connect with and click the OK button. The name will appear in
the IPDirector Name field. You can now start configuring the connection.
To switch between the connection settings of two IPDirectors, select the name of the
desired IPDirector from the IPDirector Name drop-down list.
To delete a particular connection, select the name of the desired IPDirector from the
IPDirector Name drop-down list and click the Delete button. Click OK to confirm your
action. Note that if you delete a connection, all corresponding settings will be lost.
4.1.3. Configuring the Connection with the
IPDirector API
The API tab allows you to configure the connection between the IPDirector SOAP API
and the IP2Archive Applications (Deep Archive Manager, Deep Archive Sync, IP2Archive
Communicator, Deep Archive Controller).
In the IPDirector API Settings group box you have to enter the data these applications
need to be able to communicate with the IPDirector API.
The following data has to be entered:
• API Host: The IP address or hostname of the server that hosts the IPDirector API.
• Login: The login necessary to log into the IPDirector API.
• Password: The password necessary to log into the IPDirector API.
• WSDL: The path to the IPDirector API .wsdl file. This path is is automatically entered
based on the IP address of the server that hosts the IPDirector API.
18 4. Configuring Connections
EVS Broadcast Equipment S.A. - July 2013 Issue 1.0.D