EVS IP2Archive Configurator Version 1.0 - July 2013 User Manual - Manual (Page 25)

Bins Tab
The Bins tab allows you to specify which bins should be scanned by IP2Archive and Deep
Archive Sync.
Note
Before you start configuring this tab, make sure you have already configured the
connection with the IPDirector API. See section "Configuring the Connection
with the IPDirector API" on page 1. Otherwise, an error message will appear if
you open the Bins tab. Also, the drop-down lists where you have to select the
bins will be empty.
Linking Archive and Restore Process Bins
In the Archive Process Bins group box the names of the archive process bins that have to
be scanned are displayed. For each bin, you have to select the name of the corresponding
bin in IPDirector from a drop-down list. Note that if you haven't configured the connection
with the IPDirector API yet, the drop-down list will be empty.
You have to do the same for the restore process bins in the Restore Process Bins group
box.
Set Request Bin Scan Frequency
The Request Bin Active Scan Delay field allows you to set how frequently (in seconds)
IP2Archive Communicator has to scan the Request Archive and the Request Restore bin.
By default, this is every 10 seconds. If you set this to 0, no scanning will be performed.
IP2Archive - User Manual - Configurator Version 1.0
4. Configuring Connections 21