EVS IP2Archive Configurator Version 1.0 - July 2013 User Manual - Manual (Page 30)

You also have to enter the name of the default tape group. A group is a logical association
of tapes in the LTO tape library, for example Movies, Arts, Commercials. The name of the
default group has to match the name as configured in the Sets and Groups tab of the
Configuration Utility of DIVArchive.
Click the Save button to save your settings. Click the Undo button to undo the
information you have just entered or modified.
Entering LTO Tape IDs
Introduction
The Tape Storage tab contains vital information about the LTO tapes in the tape library.
You have to add the ID of the LTO tapes that are available in the tape library. This is
necessary because the Tape Storage Controller application that communicates with the
DIVArchive system cannot obtain this list from the DIVArchive database through the
DIVArchive API. You can add single tape IDs by clicking the Add button, but you can
also import a list containing multiple tape IDs by clicking the Import Batch button.
Each tape has a unique ID. This ID can be the ID assigned to the tape by the tape
manufacturer, e.g. T0001, but can also be a custom ID assigned in agreement with the
customer. This custom ID will consist of maximum six characters, e.g. EVS001. The list
containing the tape IDs is a simple text file. The IDs have to be entered in the text file
below each other as exemplified in the image below.
26 4. Configuring Connections
EVS Broadcast Equipment S.A. - July 2013 Issue 1.0.D