EVS Xfile Version 2.02 - February 2009 User Manual - Manual (Page 84)

XFile Version 2.02– User Manual
EVS Broadcast Equipment – February 2009
Issue 2.02.D
83
• If the selected location is free, the clip destination lights green.
• If the selected location is already filled, the clip destination lights
red. In this case the publication of this clip will be aborted.
Select a publishing method from the Destination Mode drop-down list.
And press OK. For more details on the various options, see section
‘Restore Destination Mode’, on page 79).
7. A message warns you that XFile will be disconnected from the XNet.
Press OK.
8. Select other clips from the XFile list and repeat the operation.
The XNet list, the counter and the Publish column of the XFile list are
updated as soon as XFile is reconnected to the XNet.
Important
The Fast Publish command will disconnect the XFile from the XNet
and then re-connect the XFile to the XNet. During this operation,
the Multicam database is updated with the new publish list of the
XFile.
¨ This command will stop the current playbacks of XFILE clips.
¨ This command will make ‘unavailable’ the XFILE clips included
into a playlist, unless the original UmID is kept, if configured in
Advanced Parameters. Refer to section ‘Parameter for Publish’ on
page 38.