EVS Xfile Version 2.02 - February 2009 User Manual - Manual (Page 48)

XFile Version 2.02– User Manual
EVS Broadcast Equipment – February 2009
Issue 2.02.D
47
3.4 AUTOBACKUP MODE
Press to activate the Autobackup Mode. In this mode, the
system acts automatically and backs up all clips according to the criteria
defined in the Autobackup selection window. Besides, this mode is important
to take account of the different updates made during operations.
When the users select the Autobackup mode, the application performs the
Scanning Network process again to retrieve all clips to be backed up on the
XNet network.
Note
This mode MUST be enabled for the user's >ARCHIVE commands
from the Multicam systems to be taken into account.
Thanks to the selection list, the autobackup process is an automatic and
self-operating system. When a clip is created on one of the selected
servers, a copy is automatically transferred to XFile. The XFile operates
with the lower priority on the network, this means that the normal operations
of other servers are not affected by the XFile activity.
If the cameras/systems selection needs to be modified, the autobackup
mode must be disabled before entering the Session Configuration window.
Note
Other modes (backup, restore and maintenance) are also available
during autobackup: several modes can operate simultaneously.