EVS Xfile Version 2.02 - February 2009 User Manual - Manual (Page 21)

Issue 2.02 D XFile Version 2.02 – User Manual
EVS Broadcast Equipment – February 2009
20
3.1.4 S
TORAGE
A
REA
D
ISK MODE
(S
INGLE
D
ISK
/ D
UAL
D
ISK
)
Option Description
Single Disk
Only one disk is used
When the first disk is full, the system
automatically switches to the second disk.
Dual Disk
The same clips are saved to both disks at the
same time (Mirroring)
Refer to section ‘Disk Writing Mode’ on page 35 for additional
information.
Path A / B
This specifies the destination to save the MXF files. Depending on the Disk
mode selection, one or two paths is/are active for modifications.
Important
At startup, only the clips saved into the Path(s) are scanned. This
means only those clips, data included, will be accessible and
display in the XFile list.
To avoid long scanning process at startup, we advise the clips to
be distributed over different paths.
3.1.5 S
YSTEM
A
REA
Serial Number
The serial number of the system is defined during the first installshield
process and cannot be modified afterwards. The S/N is also written on the
back plate of the mainframe.