EVS Xfile Version 2.02 - February 2009 User Manual - Manual (Page 29)

Issue 2.02 D XFile Version 2.02 – User Manual
EVS Broadcast Equipment – February 2009
28
Note
For the AirBox and SpotBox servers, all cameras must be selected.
S
ELECTION
S
HORTCUTS
Different shortcuts are available to select cameras or systems with ease:
Shortcut button Description
Reset It clears all selections
Backup all It selects all cameras and all pages of all systems.
New systems being connected will be also backed
up.
Backup all Present It selects all cameras and all pages of all systems
currently connected to the network.
Backup all PREF cam It selects all preferential cameras and all pages of
all systems currently connected to the network.
A
DDITIONAL
A
UTOBACKUP
C
RITERIA
Archive status
The basic working of the XFile is to compare the content of its disks with the
clips present on the XNet. According to the result, the missing clips on disk
will be automatically backed up.
If several disks are required to backup a complete session, the Archive
status must be kept to avoid a second backup of same clips while changing
the disks.
Three conditions are required to validate the Archive status:
1. Before the Autobackup session, place a checkmark in the following box:
2. Set the ‘DEFAULT XFILE’ parameter in the Setup menu of your XT[2]
server. (see Multicam documentation for complete information).
The label appears on the line of the XT[2] server if the
‘DEFAULT XFILE’ has been correctly defined.
3. Activate the AUTOBACKUP by pressing the
button in the
XFile main window.