EVS Xfile Version 2.02 - February 2009 User Manual - Manual (Page 151)

Issue 2.02 D XFile Version 2.02 – User Manual
EVS Broadcast Equipment – February 2009
150
4.10 CREATING JOBS IN QUICKSTART
MODE
The QuickStart mode allows launching straight away the backup of one or
several record trains of one or several XT[2] servers. The users start the
backup jobs in QuickStart mode from the QuickStart window.
For more information, refer to the following sections:
• section ‘QuickStart Window’, on page 151
• section ‘Setup in QuickStart Mode’, on page 153
• section ‘How to Start a Backup Job in QuickStart Mode’, on page 150.
4.10.1 H
OW TO
S
TART A
B
ACKUP
J
OB IN
Q
UICK
S
TART
M
ODE
Note
Before launching a backup job, ensure that the requested output
and storage settings will be applied. For more information, see
section ‘Setup in QuickStart Mode’, on page 153.
To start a backup job in QuickStart mode, proceed as follows:
1. In the main XStream window, click the QuickStart button to activate
the QuickStart mode.
2. The button turns green and a check box appears next to each XT[2]
server name of the XNet network:
3. Click the check box next to the XT[2] server of which you want to back
record train(s) up.
The QuickStart dialog box opens.
4. Select the cameras you want to back up.