5 video settings in the edit gx clips window, Video) out field, Example – EVS GX Version 1.10 User’s Manual User Manual

Page 63: Video settings in the edit gx clips window, E 55, On 5.5.5, On '(video) out field, Age 55

GX server – Version 1.10 – User Manual

EVS Broadcast Equipment – September 2012

Issue

1.10.D

5.5.5 Video Settings in the Edit GX Clips

Window

Note about the examples
The frame rate used in the examples below is 50i (25 f/sec).
The schemas in the examples show the field values as defined on the raw

materials, and the corresponding TC values of the GX clip that will be displayed

to external controllers.

(Video) Out Field

The video

OUT field gives the timecode, on the video raw material, at which the GX clip

should end.
The reference timecode (00:00:00:00) corresponds to the beginning of the video raw

material.

Example

In this example, the video raw material used for the GX clip is 2 seconds. The IN field is

00:00:00:10. The video OUT point defined for the GX clip is on TC 00:00:01:20 of the

corresponding raw material.
This means the video track of the GX clip will be played out from TC 00:00:00:10 up to

TC 00:00:01:20 of the video raw material.