EVS GX Version 1.10 User’s Manual - Manual (Page 57)

GX server – Version 1.10 – User Manual
EVS Broadcast Equipment – September 2012
Issue
1.10.D
49
# Zone Name Description See also…
1. General fields General information on the GX clip Section 5.5.4
2. Video settings Video settings for the GX clip playout Section 5.5.5
3. Audio settings Audio settings for the GX clip playout Section 5.5.6
4. Video preview Display and commands to preview the video fill,
key or fill & key tracks of the GX clip
Section 5.5.7
& 5.5.8
5. Preview
progress bars
Bars to show the progress of the video or audio
preview being played
-
6. Command
buttons
Command buttons to validate or cancel the
video or audio settings, or even save them as a
profile
Section 5.5.8
5.5.2 Editing GX Clips Parameters
Introduction
In the Edit GX Clip window, you can perform the following actions:
• Preview the fill, key or fill & key tracks of a GX clip
• Monitor the audio track of a GX clip
• Specify the various settings for playing out the GX clip
The values you have edited in the Edit GX Clip window are only validated as you press
OK to leave the window.
Important
You can edit GX clip parameters as long as the GX clip is offline (the clip only
exists in the database, but has not yet been uploaded on the GX Clip drive).
The preview and audio monitoring remain available whatever the clip status.
Editing a Timecode Field
You need to take the following rules into account when you edit a timecode field.
How to Edit the Whole Timecode Field
To enter a value for the whole timecode, proceed as follows:
1. Click once the requested timecode field.
The whole timecode is selected.