beautypg.com

5 safety, compliance, and operating conditions, Ce marking, Power supply – EVS GX Version 1.10 User’s Manual User Manual

Page 16: Safety, compliance, and operating conditions

background image

Issue

1.10.D

GX server – Version 1.10 – User Manual

EVS Broadcast Equipment – September 2012

8

2.2.5 Safety, Compliance, and Operating

Conditions

CE Marking

The CE marking is affixed to indicate compliance with the following directives:

89/336//EEC of 3 May 1989 on the approximation of the laws of the Members States

to electromagnetic compatibility.

73/23/EEC of 19 February 1973 on the harmonization of the laws of the Members

States relating to electrical equipment designed for use within certain voltage limits.

1999/5/EC of 9 March 1999 on radio equipment and telecommunications terminal

equipment and the mutual recognition of their conformity.

Power Supply

This equipment is equipped with AUTOSWITCH and hot-swappable power supply.
Connection to supply: Pluggable equipment Type A (EN60950 §1.2.5): Equipment

which is intended for connection to the building power supply wiring via a non-industrial

plug and socket-outlet or a non-industrial appliance coupler or both. Correct mains

polarity must always be observed. Do not use reversible power plugs with this equipment.
Class of equipment: Class 1 equipment (EN60950 § 1.2.5): electric shock protection by

basic insulation and protective earth.
Rated voltage: 100 to 240Vac (single phase)
Rated frequency: 47-63 Hz
Related Current: 6 A (100 to 120 Vac range) 3 A (220 to 240 Vac range)
Input connector: CEE22/IEC 320 3-pin male receptacle

Important
The protective earth must be connected to the ground before powering up the

unit.