EVS Xfile Version 2.13 - July 2010 User Manual - Manual (Page 88)

XFile Version 2.13 – User Manual
EVS Broadcast Equipment – July 2010
Issue 2.13.D
79
3.8 PUBLISH MODE
Press to enter the Publish mode.
The Publish mode gives a direct access to the clips saved to XFile disks. A batch
of clips can be organized in a ‘page/bank/cam’ structure and can be accessible –
for selection and playback – via the Remote Control panel and/or the VGA of the
Multicam, or from the Clips > XFile node of the IPDirector Database Explorer.
In Publish mode, the counters, the filters and the selection modes are similar to
the Restore mode.
3.8.1 P
UBLISH
M
ODES
The following Publish modes are available:
• Fast Publish, which corresponds to the previous Publish mode and disconnects
and re-connects the XFile from the XNet
• Online Publish, which is now the default mode and works without the disconnect
/ re-connect process, but which takes more time, especially when the number of
clips is important.
• AutoPublish: refer to section 3.3.4 ‘Tab 4 – Scan Folder’ on page 32.