EVS Xfile Version 2.13 - July 2010 User Manual - Manual (Page 190)

XFile Version 2.13 – User Manual
EVS Broadcast Equipment – July 2010
Issue 2.13.D
181
H
OW TO
C
REATE A
N
EW
G
HOST
I
MAGE OF YOUR
S
YSTEM
1. Reboot the system on Bootable DVD (or USB key) which is delivered with
the original system. On XFILE system, modify Boot priority in the BIOS
settings in order to boot on the USB key.
2. For USB key only, select ‘EVS Ghost Backup or Restore’ in the menu.
3. In the ghost startup window, press [ENTER].
4. In the next window, select Local / Partition / To Image then [ENTER].
5. In the next window, select the Source drive, drive #1 then [ENTER].
6. In the next window, select the Source partition #1 then [ENTER]. Press the
[TAB] key to select the OK button, then [ENTER].
7. In the next window, press the [TAB] key to select the Look in area and
open it by pressing the down arrow key. Select the destination drive: D fat
drive (RESTORE) then [ENTER].
8. Press the [TAB] key to select the File name area then type the file name:
XFI111XX (where 111XX is the current version number). It is also
recommended to provide a description of the GHOST you are creating.
9. Press the [TAB] key to select Save then [ENTER].
10. Select ‘Compress high’, then [ENTER].
11. At the message ‘Proceed with partition image creation’ select yes then
[ENTER].
12. When the process is complete press [ENTER]. Select Quit then [ENTER],
then Yes and [ENTER].
13. Remove the USB key or DVD and reboot the system.