EVS IPWeb Version 1.0 - June 2013 User Manual - Manual (Page 60)

section "Sending a Clip to a Bin" on page 53.
The procedure is finished.
◦ If the Autoname setting has not been selected, the Add Clip to Bin window
opens:
Follow the next steps.
6. Enter a name for the clip in the Name field.
7. In the Bin field, select the bin where you want to send the clip.
8. Click the Save button to save the clip.
The clip is saved in the IPDirector database and the clip is sent to the selected bin.
6.5. How to Trim a Clip
An existing clip can be trimmed and saved with the same name, so the updated clip
replaces the previous one. A clip associated to a log cannot be trimmed because
IPDirector has protected it.
To trim a clip, proceed as follows:
1. Load a clip on the Player pane.
2. Browse the clip to mark a new IN point and/or a new OUT point.
3. Click the Mark IN button and/or the Mark OUT button respectively.
4. Click the Update button to save the updated clip.
The clip is saved in the IPDirector database. Its duration is updated in the Elements
grid/list and in the bins where it is located.
52 6. Creating a Clip and Sending it to a Bin
EVS Broadcast Equipment S.A. - June 2013 Issue 1.0.A